Need Shipping Outside the US / Canada?

If you need your products shipped internationally, use this eBay store.

We ship to eBays forwarder in Kentucky and eBay will forward the order to you via their Global Shipping Program! Shipping costs and duty are calculated by eBay and paid by the buyer.

I saw this on a post on the iATN website and really liked it! Coupled with any probe from Jumperkits, this makes a great tool to have in your box!

Just crimp a couple of male spade terminals onto the bulb leads, and you can connect any probe found in a Jumperkit!

Here’s the link to the post on iATN.

Jumperkits, LLC has a Newsletter!

You can now sign up for our newsletter that we publish via Mailchimp!

We typically send out newsletters when:

• We have new product to announce
• We've enhanced our website to better serve you
• To share information on automotive diagnostic techniques

Sign up here

18001.10-Kit now with Square Micro 64's

The 18001.10-Kit offered by Jumperkits, LLC now includes Square Micro 64 probes!

3 Male Probes, and 3 Female Probes have been added to the kit.

These are Tyco terminal part numbers 963716-1 (male) and 963715-1 (female) and fit terminals found in common automotive electrical connectors.

The male pin measures .64 mm.

Here's the contents of the updated 18001.10-Kit:

Today we start offering the square Micro 64 probes that you have been looking for!

These probes are available in a pack of 3 Male and 3 Female probes.

 

Typical Applications:

·         Automotive and commercial vehicles

·          Engine management systems

·          Powertrain control systems

·          ABS braking systems

·          Airbag systems

These are Tyco terminal part numbers 963716-1 (male) and 963715-1 (female). The Male pin measures .644mm. These probes fit terminals found in the following vehicles:

2010 - 2013 Buick LaCrosse

2011 - 2013 Buick Regal

2012 - 2013 Buick Verano

2007 - 2013 Cadillac Escalade Models

2006 - 2013 Cadillac CTS

2006 - 2011 Cadillac DTS

2004 - 2013 Cadillac SRX

2005 - 2011 Cadillac STS

2007 - 2013 Chevrolet Avalanche, Suburban, Silverado, Tahoe

2004 - 2011 Chevrolet Aveo

2005 - 2010 Chevrolet Cobalt All Models

2011 - 2013 Chevrolet Cruze

2010 - 2013 Chevrolet Equinox

2006 - 2011 Chevrolet HHR

2005 - 2013 Chevrolet Malibu

2006 - 2013 Chevrolet Impala

2012 - 2013 Chevrolet Sonic

2011 - 2013 Chevrolet Volt

2007 - 2013 GMC Sierra, Yukon And Denali Models

2010 - 2013 GMC Terrain

2007 - 2010 Pontiac G3

2007 - 2010 Pontiac G5

2005 - 2010 Pontiac G6

2008 - 2009 Pontiac G8

2005 - 2006 Pontiac  Pursuit (Canada Only)

2006 - 2010 Pontiac Solstice

2005 - 2010 Pontiac Wave (Canada Only)

2010 - 2013 Buick LaCrosse
2011 - 2013 Buick Regal
2012 - 2013 Buick Verano
2007 - 2013 Cadillac Escalade Models
2006 - 2013 Cadillac CTSThese are Tyco terminal part numbers 963716-1 (male) and 963715-1 (female). The male probe measures .64 mm.
These probes fit terminals found in the following vehicles:These are Tyco terminal part numbers 963716-1 (male) and 963715-1 (female). The male probe measures .64 mm.
These probes fit terminals found in the following vehicles:

Company Information

Jumperkits, LLC

10043 Hackensack St

Port Charlotte, FL 33981

Contact – Mike Balog

Cell – 231-645-2748

Web site – www.Jumperkits.com

Drag Test – Another use for Jumperkits

Intermittent operation of electrical components can often be caused by poor electrical connections. Poor connections can be caused by;

·         Corroded connector terminals

·         Pins or sockets  that are pushed back into the connector body

·         Poorly mated connector terminals

·         Loose pins

·         Worn out pins or sockets

Corroded terminals can be easily identified by disconnecting the connector bodies and carefully examining the pins and sockets for any corrosion. Any terminals that show signs of  corrosion should be replaced.

Pushed back pins or sockets can also be found through visual inspection and also require replacement. Sometimes the cause of the loose terminal may be a worn out body, rather than the terminal itself. If this is the case, replace the connector body and any required terminals.

If nothing is visibly wrong, poorly mated, loose, or worn out terminals can be discovered by performing a “drag test” using the correct wire from our Jumperkits.

Select the correct mating terminal from the Jumperkit and manually insert it into the terminal in the connector. As you slide the terminal in and out, it should fit securely and you should feel a significant amount of “drag”. If not, the terminal should be replaced.

Test Probes for Square Micro 64 Termnals

When we added the Round Micro 64 test probes to our Jumperkits, many of our customers expressed an interest in probes for the newer square Micro 64 terminals.

It took some time, but we finally have located the correct terminal numbers for both the male and female terminals! We found a supplier for them, and expect to have them in stock in 4 to 5 weeks.

We will be adding 3 of each gender to the 18001.10-KIT and offering an separate update kit for those customers who already own the 18001.10-KIT and just want to add the Square Micro 64 probes.